Is the IP address for Admin within this range? Is it expected? Explain your answer.

Under the Network Setup heading on the Basic Setup page, notice the IP address range for the DHCP server.Use admin for both the username and password.Enter 192.168.0.1 in the URL field to open the web configuration page of the wireless router.In the Desktop tab on Admin, choose Web Browser.Note : Values can vary within the network range due to normal DHCP operation. What is the default gateway of the computer? Click IP Configuration and select DHCP.Click Admin, and select the Desktop tab.Admin will receive IP address information from the DHCP server on WR. A wireless router usually includes a DHCP server, and the DHCP server is usually enabled by default on the LAN. To reach the WR management page, Admin must communicate on the network. You may also click Fast Forward Time just above the Connections selection box in the yellow bar. Note : If no green triangle s are shown, make sure to enable Show Link Lights under Options > Preferences. When Packet Tracer displays green triangle s on both sides of the connection between Admin and WR, continue to the next step. Admin is now connected to the LAN ( Gigabit Ethernet 1 ). WR will act as a switch to the devices connected to the LAN and as a router to the internet. Click WR and choose an available Ethernet port to connect the other end of the cable.

When the cursor changes to connection mode, click Admin and choose FastEthernet0.

Click Copper Straight-Through, represented by a solid black line. Select Connections, represented by a lightning bolt, from the bottom-left side of Packet Tracer.

Connect Admin to WR using a straight-through Ethernet cable through the Ethernet ports.

Instructions Part 1: Connect to a Wireless Router Step 1: Connect Admin to WR. Furthermore, you will also update some of the default settings. In this activity, you will configure a wireless router and an access point to accept wireless clients and route IP packets.

Add an AP to the network to extend wireless coverage.

Connect a wireless device to the wireless router.

Connect a wired device to the wireless router.

Packet Tracer – Configure a Wireless Network (Answers Version)Īnswers Note : Red font color or g ray highlights indicate text that appears in the instructor copy only.

Pka packet tracer labs for tablet